This is a case of custom spinning pin from Australia, for customers who need to refer to how to make spinning pins.
This customer is a supplier of magazine printing, clothing, and tourist souvenirs in Queensland, Australia. We have cooperated for more than 10 years. He is very friendly and there has been no conflict in all these years of cooperation. Our cooperative products include offset printed badges, metal enamel pin, refrigerator magnets, Printed A6 styrene cards, etc. However, he has never made spinning pins. This time he wants to be innovative and make a batch of custom spinning windmill pins for his client. As usual, the client asked if it was workable and provided as much information as possible:
- Process type: spinning pin with soft enamel color
- Size: a finished size of 37mm in height
- Design: Rotate the windmill blades and bar
- Quantity: 500 pieces
There are several pain points in the email communication process:
- The image is three-dimensional and abstract (as shown in the picture), and a flat 2D image needs to be reconstructed;
- Additional text needs to be added, and the specific placement has not been thought out;
- The windmill blades in the real picture are too dense, but the size of the spinning pin is limited (especially the height), so the lines need to be compressed and simplified.
We showed the custom spinning pin gif for customer's reference.
1. Solution
- Based on the known information and pictures, our artwork designer spent 2 hours to draw multiple 2D versions for the customer's reference;
- Add a text plate on the windmill base;
- The whole would be plated with antique nickel, and the blades are finished with gray soft enamel, which looks more coordinated and unified, and highlights the shape of the blades;
- In addition, in order to ensure the stability of the spinning pin, although the size is not large, we added two pins on the back.
The final artwork is as follows:
2. Production details
After the customer had confirmed the artwork, we started production. There were still the following points that need to be paid attention to during production:
- Due to the small size, it takes enough patience to make the middle positioning point of the rotating top and bottom pieces;
- The enamel area behind the letters is small, but the color should be even and full;
- Pay attention to the aesthetics of the rivet points on the back, which should not be too large;
- The polishing of the sides can’t be too heavy, and the strength should be equal to ensure that the thickness of the blades is the same.
This customer rarely makes samples and leaves the production to us throughout the process. After all, it is the customer's first attempt, and we took the initiative to share the production updates with him to let him understand the production progress and actual effect.
(Another related client case: Custom Combination Pin)
3. The production procedure
Since this is the first time for the customer to do this kind of spinning pin, they are full of expectations and anxiety about the finished product. In order to dispel customers' doubts, we promptly sent updated photos.
4. Customer feedback
The customers have expressed their gratitude for our professionalism and service as always. The following is a screenshot of his feedback.
5. Summary
Why can we be favored by customers and achieve long-term cooperation?
① We attach importance to every order of customers, encourage customers to innovate and offer them production confidence and technical support.
② Each department from drawings to packing works closely together without delays or communication gaps.
③ Be patient, proactive and positive in communication.
As an experienced lapel pin manufacturer, whether it is hardware equipment, service concept, staffing, or quick response, we are very confident in providing customers with a full range of services, that greatly exceed customer expectations.
We have helped our clients make a lot of interesting custom spinning pins, and the creativity of our clients is always amazing. What we can do is to control the quality well, so that your creative ideas become reality.
SICpin has a workshop area of 2300 square meters, 42 employees, and 26 sets of production equipment. We always maintain technological innovation in the enamel pin manufacturing industry and guarantee product quality with advanced equipment and strict management concepts.
At least 500,000 pins are produced monthly, involving corporate groups, political events, sports, fashion culture, product accessories, art design, and other fields. We maintain in-depth cooperation with customers in more than 40 countries and regions.
How useful was this post?
Click on a star to rate it!
Average rating 5 / 5. Vote count: 2
No votes so far! Be the first to rate this post.